Custom Cabinet Installation in Riverside, CA
Riverside Kitchen Remodeling Pros is the Inland Empire's trusted expert in built-to-order kitchen cabinetry, specializing in face frame and frameless European construction, inset door packages, and full-height pantry and island builds. We offer dovetail drawer boxes and soft-close undermount slides as standard.
- Licensed, insured & bonded
- Itemized written estimates
- Permits pulled and inspections scheduled
- Riverside & the Inland Empire
Request a FREE Quote!
Or call (951) 257-7991. Calls only, we do not receive messages at this number.
Our team provides shop drawings, laser field verification and finish-carpentry installation, delivering furniture-grade detail for homes, with hard-use durability. Backed by a California contractor license and general liability insurance, we have completed projects ranging from a nine-cabinet galley to a 34-foot run with two islands.
From scribing a stile to an out-of-plumb 1920s wall to setting crown, light rail and toe kick on the last day, our team handles every detail. Serving Riverside, Corona, Chino Hills and Yorba Linda, we ensure fast, efficient service and deliver reliable, professional, and beautiful results on every custom cabinet installation.
Call (951) 257-7991 for a free cabinet design consultation. Bring a sketch or a photo and we will field measure, price the run in writing, and show you elevations before anything goes to the shop.
Custom Cabinet Services in Riverside
Full Kitchen Cabinet Packages
Base, wall, tall and specialty units built to the dimensions we measure, not the nearest catalog size. That matters in Riverside’s pre-1960 stock around Downtown, the Eastside and the Northside, where corners are rarely square and ceiling height drifts.
Islands, Pantries and Built-Ins
Seated islands with a waterfall return, prep islands carrying a sink or cooktop, pantry walls, banquettes and appliance garages, in the same door style as the main run.
Replacement Cabinets in an Existing Kitchen
You keep the layout and the plumbing, we replace every box. Common in Orangecrest, Mission Grove and Canyon Crest, where the particleboard builder boxes are swelling at the sink base.
Shop Drawings and Field Verification
Every job gets a drawing set: plan, elevations, appliance clearances, scribe allowances and a cut list. We verify before the shop cuts, because a wall that reads 142 inches with drywall on it can read 143.5 inches without.
Face Frame vs Frameless European Construction
The biggest construction decision, and it changes storage and cost before you have picked a color.
Face frame. A supporting frame roughly 1.5 inches wide is attached to the front of the box, and the doors mount to that frame. The frame stiffens the carcass, forgives an imperfect opening, and is what makes inset doors possible. The tradeoff is that it eats into the opening, so drawer boxes are narrower than the cabinet width suggests.
Frameless, also called European. No front frame. Doors attach directly to the sides of the box, so the full interior width is usable and drawer boxes are wider at the same cabinet size. The look is a tight grid of doors with narrow reveals. It demands square boxes and a precisely leveled install, and usually costs more than face frame.
Box materials. Carcasses are plywood, particleboard (chipboard) or medium-density fibreboard. Plywood holds screws and resists moisture better, which matters at the sink base. MDF machines cleanly and is the better substrate under paint. Visible surfaces are clad in timber veneer or plastic laminate, or painted.
See the Standard of Finish
BeforeAfter
Drag the handle across. The same kitchen, same camera position, before demolition and after completion.
Sizing, and Why Custom Escapes the Grid
| Cabinet type | Standard depth | Standard height | Standard widths |
|---|---|---|---|
| Base | 24 inches | 34.5 inches | From 9 inches, in 3-inch increments |
| Wall | 12 inches | 30, 36 or 42 inches | From 12 inches, in 3-inch increments |
| Tall / pantry | 12 or 24 inches | 84 to 96 inches | From 12 inches, in 3-inch increments |
A 3-inch grid almost never lands on the wall you actually have. The gap gets absorbed by filler strips, which is why stock kitchens end with a dead 2-inch strip beside the refrigerator. Custom takes the whole dimension: a 13-foot 4-inch wall becomes 13 feet 4 inches of cabinet, wall boxes run to a 9-foot ceiling, and a 21-inch pantry fits a niche no catalog sells.
Overlay, Door Styles and Trim
Overlay. *Full overlay* doors cover nearly the entire face, leaving reveals of an eighth to a quarter inch, and it is standard on frameless boxes. *Partial overlay* leaves more of the frame exposed and is the most economical. *Inset* doors sit flush inside the face frame: the most demanding to hang, the most expensive, and the detail that reads as furniture.
Door styles. *Shaker* is a flat center panel inside a square-edged five-piece frame, the most-requested style in Riverside and at home in a 1930s bungalow or a new build. *Raised panel* stands the panel proud of the frame with a shaped edge. *Slab* is a single flat face, contemporary and the style that shows off veneer figure.
Trim. The toe kick is the recessed kick space at the bottom of a base cabinet that gives your feet clearance. Crown closes the gap at the ceiling and is what makes cabinets read as built-in rather than dropped in. Light rail hides under-cabinet fixtures. All three are scribed on site to the actual ceiling line.
Storage Hardware We Build In
- Lazy Susan. A shelf rotating around a central axis, turning a blind corner into reachable storage.
- Blind corner pull-out. Swings the hidden half of a corner cabinet out into the room.
- Pull-out mixer shelf. Lifts a stand mixer to counter height, then hides it.
- Soft-close undermount slides. Full-extension slides under the drawer box, so it opens completely and closes silently with no visible hardware.
- Dovetail drawer boxes. Solid wood joined at the corners with interlocking dovetails, not staples and glue.
- Trash pull-outs, spice racks, tray dividers and interior lighting.
Stock vs Semi-Custom vs Custom Cabinets
| Stock | Semi-custom | Custom | |
|---|---|---|---|
| Sizing | Fixed 3-inch grid | Grid plus modifications | Any dimension |
| Box material | Usually particleboard | Particleboard or plywood | Plywood or MDF, your choice |
| Construction | Face frame, partial overlay | Face frame or frameless | Either, inset available |
| Drawer boxes | Stapled, roller slides | Often dovetail, undermount | Dovetail, soft-close undermount |
| Lead time | 1 to 3 weeks | 4 to 8 weeks | 6 to 12 weeks |
| Relative cost | Lowest | Middle | Highest |
Custom Cabinet Cost in Riverside, CA
Cabinetry is the largest line on almost every kitchen budget. These are typical Riverside market ranges, not a quote.
| Scope | Typical Riverside range |
|---|---|
| Custom cabinet package, whole kitchen | $15,000 to $50,000+ |
| Custom island cabinetry only | $4,500 to $22,000 |
| Pantry wall or built-in unit | $3,500 to $12,000 |
| Cabinets within a mid-range full remodel | $18,000 to $35,000 of a $30,000 to $65,000 project |
| Refacing existing boxes instead | $6,000 to $18,000 |
What moves the number:
1. Linear feet of run. Cabinets price by the foot, so 22 feet costs roughly double 11 feet at the same grade. 2. Construction. Frameless typically costs more than face frame at equal quality. 3. Overlay style. Inset carries a real premium because of the fitting labor. 4. Box material. Full plywood over particleboard adds cost across every unit. 5. Finish. Painted MDF, stained veneer and matched-grain veneer are three prices. 6. Fittings and site condition. Pull-outs and inserts add up unit by unit, and out-of-square walls in older Riverside housing mean more scribe labor.
How a Custom Cabinet Project Runs
| Phase | What happens | Typical duration |
|---|---|---|
| 1. Consultation and measure | Site visit, field measure, budget range | 1 visit |
| 2. Design and proposal | Layout, door and finish selections, line-item scope | 1 to 3 weeks |
| 4. Shop drawings and approval | Cut list, hardware schedule, your sign-off | 1 to 2 weeks |
| 5. Build and finish | Shop fabrication, sanding, paint or stain | 6 to 12 weeks |
| 6. Field verify and deliver | Re-measure after demolition, deliver and acclimate | 2 to 4 days |
| 7. Install and punch | Set, level, scribe, hang doors, crown, toe kick, touch-up | 4 to 9 days |
Cabinet lead time, not install labor, sets the schedule. Order early.
Why Riverside Homeowners Hire Us for Cabinetry
Licensed and insured. We hold a California contractor license through the CSLB, including the classification covering cabinet, millwork and finish carpentry, and carry general liability coverage.
We measure twice. Ordering off pre-demolition dimensions is the most common way a custom package arrives wrong. We verify with the studs open.
Installers, not delivery drivers. Boxes are shimmed, leveled, screwed through the back into framing and scribed to the wall so reveals stay consistent. Doors get adjusted at the hinge afterward.
Written warranty. Every project carries a written workmanship warranty alongside manufacturer coverage on doors and hardware.
Areas We Serve
| City | Distance from Riverside | County |
|---|---|---|
| Corona custom cabinetry | ~15 mi SW | Riverside |
| Chino Hills cabinet installation | ~25 mi NW | San Bernardino |
| Yorba Linda kitchen cabinets | ~27 mi W | Orange |
| Rancho Cucamonga cabinet work | ~20 mi N | San Bernardino |
Inside Riverside we work all 28 designated neighborhoods, from pre-1960 Downtown and the Wood Streets vicinity to the Orangecrest tracts.
Related Services
- Refacing sound existing boxes when only the doors change.
- Whole-kitchen remodeling in Riverside, where cabinetry is one line item.
- Luxury kitchen remodels built around inset cabinetry.
- Kitchen island installation, seated or prep.
- Countertop replacement, templated off installed boxes.
- Kitchen design and 3D planning if you want elevations first.
- Condo and townhome cabinetry for galley runs under HOA rules.
- See all kitchen services or go back to kitchen remodeling in Riverside.
Frequently Asked Questions
How much do custom kitchen cabinets cost in Riverside, CA?
A custom package for a whole kitchen typically runs $15,000 to $50,000 or more here. Island cabinetry alone lands between $4,500 and $22,000. Linear feet, construction, overlay and finish drive the number.
What is the difference between face frame and frameless cabinets?
Face frame cabinets carry a frame about 1.5 inches wide across the front of the box, and the doors mount to it. Frameless European cabinets have no front frame, so doors attach directly to the box sides. Frameless gives more usable width and a tighter look. Face frame forgives an out-of-square wall and is required for true inset doors.
Are custom cabinets worth it over stock or semi-custom?
They are when your walls miss the 3-inch grid, when you want inset doors, when the ceiling is above 8 feet, or when the room has an odd niche. For a standard rectangle with the layout staying put, semi-custom often gets most of the result for less.
How long do custom cabinets take?
Six to twelve weeks from approved shop drawings to delivery, then four to nine days on site.
What are the boxes made from?
Plywood, particleboard or MDF, with visible surfaces in timber veneer, plastic laminate or paint. We recommend plywood at the sink base and MDF under paint, since it does not telegraph grain.
Do you offer soft-close hardware and dovetail drawers?
Yes, on every custom package. Drawer boxes are solid wood with dovetailed corners riding full-extension soft-close undermount slides, so no hardware is visible from the side.
Do I need a permit for new cabinets?
Usually not for cabinets alone. A permit is typically required once electrical, plumbing, gas or structural work is involved, pulled through the City of Riverside Community & Economic Development Department or the relevant city or county department.
Get a Custom Cabinet Quote in Riverside
Call (951) 257-7991 or request an estimate online. Tell us the approximate linear feet, the ceiling height, and whether you lean toward face frame or frameless. We will field measure, walk the overlay and door options with you, and put a written range in your hands.
Riverside Kitchen Remodeling Pros, 3610 Central Ave, 6th Floor, Ste 14, Riverside, CA 92506. Licensed. Insured. Built to the wall you actually have.
Request a FREE Quote!
Or call (951) 257-7991. Calls only, we do not receive messages at this number.
Licensed, insured and bonded. Calls only, we do not receive messages at this number.