Riverside Kitchen Remodeling Pros, kitchen remodeling contractor in Riverside, CA
(951) 257-7991 Licensed, Insured & Bonded
Free Estimate

Condo & Townhome Kitchen Remodel in Riverside, CA

Riverside Kitchen Remodeling Pros is Riverside County's trusted expert in attached-home kitchen renovation, specializing in galley kitchen rebuilds, HOA-approved cabinet replacement, and stacked-plumbing sink and countertop work. We offer single-wall reconfiguration and same-footprint appliance upgrades.

  • Licensed, insured & bonded
  • Itemized written estimates
  • Permits pulled and inspections scheduled
  • Riverside & the Inland Empire

Request a FREE Quote!

Or call (951) 257-7991. Calls only, we do not receive messages at this number.

01

Our team provides complete architectural review packets and building-access coordination, delivering quiet, contained work for owner-occupied units, with fast turnover. Backed by a California contractor license and general liability insurance, we have completed projects ranging from an 8-foot single-wall galley to a two-story townhome kitchen and dining reconfiguration.

From elevator padding and reserved freight windows to shared-wall demolition, stack tie-ins and final punch, our team handles every detail. Serving Riverside, Corona, Norco and Canyon Lake, we ensure fast, efficient service and deliver reliable, professional, and beautiful results on every condo kitchen remodeling project.

Call (951) 257-7991 for a free condo kitchen consultation. Send your HOA work rules with the request and we will tell you what the board is likely to approve.

02

What We Do in Riverside Condos and Townhomes

A condo kitchen is not a small house kitchen. The run is usually 8 to 14 linear feet, the sink sits on a wet wall shared with a neighbor or stacked above another unit, and the board approves your schedule before you pick a door style.

Galley and Single-Wall Rebuilds

Two facing runs with a 36 to 48 inch aisle, or one wall carrying everything. We rebuild them with taller wall cabinets, deep drawer banks instead of low shelves, and appliances sized to the opening. A 30-inch range in a 29.5-inch gap is the problem we inherit most.

Cabinets Sized to the Opening

Stock boxes step in 3-inch increments, so a 13-foot wall ends with filler strips and a corner you cannot reach. Built-to-order boxes take the whole run. Where the carcasses are plywood and square, refacing gets you there faster and for less.

Countertops, Sinks and Appliance Swaps

Quartz and granite in 8 to 20 square foot runs, undermount sinks with a finished edge, and slide-in ranges, counter-depth refrigerators and 18-inch dishwashers where the aisle will not take a full-size box.

Layout Changes That Stay Inside the Wet Wall

Peninsulas removed, a pass-through cut into a non-bearing partition, uppers replaced with open shelving. What we will not do is drag a drain twelve feet across a slab where that stack serves four other units.

03

HOA Approval and Building Logistics

This is what separates a condo remodel from a house remodel.

The architectural review packet. Most associations require a written submittal before demolition: scope, plan, elevations, finish selections, contractor license and insurance, and the schedule. Boards commonly meet monthly, so a late packet costs you four weeks. We assemble and submit it.

Certificate of insurance naming the HOA. Nearly every association requires a COI listing the association, and often the management company, as additional insured. We issue that before we book access.

Elevator reservations. Cabinets, slab and appliances move in a reserved freight window, pads hung and floor protection run to your door.

Work hours and noise. Associations typically restrict demolition and power tools to weekday daytime hours, with the city noise ordinance underneath. We front-load the loud work.

Shared walls and stacked plumbing. Waste and vent stacks run vertically through multiple units, so any tie-in means a scheduled shutdown, neighbor notice and often board sign-off.

Parking and debris. Guest parking is finite and on-site dumpsters are usually prohibited, so we haul out daily on the route the manager approves.

04

See the Standard of Finish

Dated cherry kitchen with a small island before renovationThe same kitchen after renovation with charcoal cabinetry and a stone-topped islandBeforeAfter

Drag the handle across. The same kitchen, same camera position, before demolition and after completion.

Request a Free Estimate

05

Condo Kitchen Remodel Cost in Riverside, CA

Riverside is 45.8% renter-occupied, so much of the condo work here is investor-owned and priced on rent recovery, not resale taste. These are typical market ranges, not quotes.

Scope Typical Riverside range Notes
Doors, hardware and counters only $8,000 to $16,000 Refacing plus quartz on a 10-foot run
Standard condo or townhome kitchen $18,000 to $45,000 Cabinets, counters, backsplash, flooring, lighting
Rental turn package $12,000 to $26,000 Durable finishes, compressed schedule
Countertops only $3,000 to $12,000 Template, fabricate, install, sink cutout
Layout change inside the wet wall Add $4,000 to $15,000 Electrical, plumbing trim, patching, permit

Five things move the number: linear feet of run, cabinet grade, countertop material, whether plumbing or gas moves, and how restrictive building access is. That last one is real money. A fourth-floor unit on one reserved elevator carries more labor hours than the same kitchen in a townhome with a driveway.

06

How a Condo Kitchen Project Runs

Step What happens Typical time
1. Measure and rules review Field measure, read the CC&Rs and work rules 1 visit
2. Design and proposal Layout, elevations, finishes, line-item scope 1 to 2 weeks
3. HOA submittal Packet assembled, submitted, board review 2 to 6 weeks
4. Permits, ordering and access City submittal, cabinet and slab order, elevator booking 2 to 6 weeks
5. Demolition and rough-in Tear-out, electrical, plumbing, inspection 4 to 7 days
6. Cabinets, counters, punch Set, template, install, tile, trim, closeout 3 to 5 weeks

Board review is the longest item, and it comes before ordering.

07

Why Riverside Condo Owners and Investors Hire Us

Licensed and insured. We hold a California contractor license through the CSLB and carry general liability coverage.

We handle the association, not you. Packet, COI, elevator booking, neighbor notice and access logs, one point of contact for the manager.

We work clean in occupied buildings. Zippered containment at the opening, negative air where dust travels, corridor protection, daily haul-out.

We price the access, not just the kitchen. A stair-only walk-up or a short daily work window adds labor hours, and those hours go in the proposal, not a later change order.

Written warranty. Every project carries a written workmanship warranty alongside manufacturer coverage.

08

Areas We Serve

City Distance from Riverside County
Corona condo and townhome kitchens ~15 mi SW Riverside
Norco kitchen remodeling ~13 mi NW Riverside
Eastvale attached-home remodels ~19 mi NW Riverside
Canyon Lake gated-community kitchens ~32 mi SE Riverside

Inside Riverside we work all 28 designated neighborhoods, from Downtown to Canyon Crest and Mission Grove.

09

Related Services

FAQ

Frequently Asked Questions

How much does a condo kitchen remodel cost in Riverside, CA?

Most condo and townhome kitchens here run $18,000 to $45,000. A doors-and-counters refresh lands closer to $8,000 to $16,000. Cabinet grade, countertop material and access rules move it most.

Do I need HOA approval, and how long does it take?

In most cases yes, and two to six weeks is typical because many boards review monthly. The submittal covers scope, drawings, finishes, contractor license and insurance, and the schedule. We start it while cabinets are still being specified so the timelines overlap.

Can you move the sink or the range in a condo?

Sometimes, and only a short distance. Waste and vent stacks are shared vertically, so relocating a drain means opening a shared chase and getting board sign-off. Gas and electrical moves are far easier.

How long will my kitchen be out of service?

Four to seven weeks on site, including two to five days without a sink during counter template and install. Refacing-only projects finish inside a week.

Can you work while the unit is tenant-occupied?

Yes, with a compressed schedule, a temporary prep station and daily cleanup. Most owners with tenants in place still choose a turnover window, because the kitchen is out of service for weeks.

Do you work on rental and investor-owned units?

Yes. Much of our condo work is turnover-driven. Those projects get durable finishes and a compressed schedule so the unit relists sooner.

Do I need a city permit as well as HOA approval?

Typically yes once electrical, plumbing or gas is involved, pulled through the City of Riverside Community & Economic Development Department or the relevant city or county department elsewhere. Board approval and a building permit are separate, and you usually need both.

Free estimate

Book Your Condo Kitchen Consultation in Riverside

Call (951) 257-7991 or request an estimate online. Tell us the building, the floor, roughly how many linear feet of run you have, and whether you have the association's work rules. We will field measure, price it in writing, and open the packet the same week.

Riverside Kitchen Remodeling Pros, 3610 Central Ave, 6th Floor, Ste 14, Riverside, CA 92506. Licensed. Insured. Built for buildings with rules.

Request a FREE Quote!

Or call (951) 257-7991. Calls only, we do not receive messages at this number.

Licensed, insured and bonded. Calls only, we do not receive messages at this number.

Call Now Free Estimate