Kitchen Design & 3D Planning in Riverside, CA
Riverside Kitchen Remodeling Pros is Riverside County's trusted expert in kitchen design and 3D planning, specializing in field-measured as-built drawings, cabinet elevations, and rendered walkthroughs. We offer appliance specification and lighting plans.
- Licensed, insured & bonded
- Itemized written estimates
- Permits pulled and inspections scheduled
- Riverside & the Inland Empire
Request a FREE Quote!
Or call (951) 257-7991. Calls only, we do not receive messages at this number.
Our team provides material and finish selections alongside structural feasibility review, delivering buildable drawings for homes, with code-ready documentation. Backed by a California contractor license and general liability insurance, we have drawn and built projects ranging from a nine-foot galley refit to an addition with a relocated bearing wall.
From the first tape measure against a crooked 1950s plaster wall to a line-item budget stapled to the drawing set, our team handles every detail. Serving Riverside, Corona, Chino Hills and Yorba Linda, we ensure fast, efficient service and deliver reliable, professional, and beautiful results on every kitchen design project.
Call (951) 257-7991 to book a design consultation. The fee runs $500 to $3,500 depending on scope, and every dollar is credited to your build if you construct with us.
What a Riverside Kitchen Design Package Includes
Design is where a remodel gets priced honestly. A drawing set forces every decision (cabinet sizes, clearances, where the hood duct runs) onto paper, where a change costs an eraser instead of a demolition crew. Riverside’s pre-1960 stock Downtown and on the Eastside is rarely square, and Orangecrest tract homes have their own quirks around soffits and posts, so we measure every room ourselves.
| Deliverable | What it is | What it prevents |
|---|---|---|
| Field measure and as-built | Every wall, window, soffit and out-of-square corner recorded on site | Cabinets ordered to dimensions the room does not have |
| Plan view and elevations | Scaled overhead layout plus a straight-on drawing of every cabinet wall | Tight aisles, and wall cabinets that die into a window casing |
| 3D rendered walkthrough | A navigable view of the room in your actual materials | Choosing a finish off a two-inch chip |
| Selection and appliance schedule | Door, finish, counter, tile, hardware and appliance models with cutout dimensions | A 36-inch range arriving for a 30-inch opening |
Cabinet Elevations and Filler Strategy
Cabinets come in fixed widths, from 9 inches for base boxes and 12 for wall boxes, in 3-inch increments. Base boxes run 24 inches deep and 34.5 high, wall boxes 12 deep in 30, 36 or 42 inch heights. Real rooms are not multiples of three. The elevation is where we decide which gaps take a scribe filler and where a run stops short rather than fight a window.
Appliances, Structure and Systems
Every appliance carries a cutout dimension and a clearance requirement, so we specify models on the drawing, confirm the hood duct path, and check refrigerator and dishwasher doors against the island. The lighting plan sets fixture placement, switching and circuits with Title 24 energy requirements accounted for. Moving a sink means moving a drain, and drains need fall. Removing a wall means learning whether it carries load, which typically calls for an engineered beam detail and plan check through the City of Riverside Community & Economic Development Department. All of it gets flagged in design, not demolition.
Kitchen Layouts, and Where They Came From
The fitted kitchen, meaning cabinets, counters and appliances built as one continuous engineered run, is not an ancient idea. It traces to the Frankfurt Kitchen of 1926 by Margarete Schütte-Lihotzky, just 1.9 by 3.4 metres, built on the time-motion studies of Christine Frederick. Kitchens before it were assembled from unfitted furniture. Every layout below descends from that work.
| Layout | Works when | Trade-off |
|---|---|---|
| Single-wall | Condos and narrow footprints | Short run, everything competes for one wall |
| Galley | Two parallel runs, efficient to work in | Feels closed, common in 1960s to 1980s hillside tract stock like Diamond Bar’s |
| L-shaped | The most flexible plan, opens to dining | Corner access needs a lazy Susan or blind corner pull-out |
| U-shaped | Maximum counter and storage | Feels walled-in, and the third run blocks sightlines |
| Peninsula | Adds seating and prep without an island | Traffic pinches at the connected end |
| Island | Adds prep, seating, a sink or cooktop | Needs roughly 42 inches of clearance on working sides |
Which one fits is a measurement question, not a taste question. We test two or three against your walls first.
See the Standard of Finish
BeforeAfter
Drag the handle across. The same kitchen, same camera position, before demolition and after completion.
Kitchen Design Fees in Riverside, CA
Design is billed as a package, and the fee is credited against your construction contract when you build with us. The figures below are market ranges, not a quote.
| Design package | Typical fee | Scope |
|---|---|---|
| Concept layout | $500 to $900 | Field measure, one plan option, budget range |
| Standard design | $900 to $1,800 | Two layouts, elevations, one rendered view, selection guidance |
| Full remodel package | $1,800 to $2,800 | Complete set, 3D walkthrough, selection and appliance schedule, line-item budget |
| Structural or addition package | $2,800 to $3,500 | The above plus wall-removal feasibility, beam coordination, permit-ready drawings |
Four things move the fee: how many cabinet runs need elevations, whether the layout changes, whether a wall comes out, and how many revision rounds you want. Riverside’s median household income was about $88,575 in 2023 and 54.2% of housing here is owner-occupied, which is why most of this work lands in the middle tiers.
How the Design Process Runs
1. Consultation and field measure, one visit. How you cook, where the plan fails now, a budget band, then wall lengths, ceiling heights, openings, plumbing, gas and panel location drawn as an as-built. 2. Layout options, one to two weeks. Two or three plans tested against the as-built, with notes on what each costs. 3. Elevations and 3D, one week. The chosen plan drawn in full, then rendered in your door style, counter and tile. 4. Selections and specs, one to two weeks. Finish, counter, backsplash, hardware, lighting and appliance models locked to a schedule. 5. Budget, revisions and handoff, three to five days. Line-item pricing, one or two revision rounds, then the set goes to permitting where required, to the cabinet shop, and to the crew.
Most packages take three to five weeks from measure to locked set. Cabinet lead time starts only after that, which is why design delays are expensive.
Why Riverside Homeowners Start With Design
We build what we draw. The person drawing your kitchen is on the same team as the crew installing it, so nothing in the set falls apart in the field.
The fee is credited. Design runs $500 to $3,500 and comes off your construction contract when you build with us.
Licensed and insured. We hold a California contractor license through the CSLB, carry general liability coverage, and back our builds with a written workmanship warranty.
Real budgets on real drawings. Every set leaves with line-item pricing and named allowances, so scope gets cut deliberately rather than discovered in week six.
Areas We Serve
We design kitchens across Riverside and the Inland Empire.
| City | Distance from Riverside | County |
|---|---|---|
| Corona kitchen design | ~15 mi SW | Riverside |
| Rancho Cucamonga | ~20 mi N | San Bernardino |
| Chino Hills remodeling plans | ~25 mi NW | San Bernardino |
| Yorba Linda | ~27 mi W | Orange |
Within the city we work all 28 designated neighborhoods, and the problem changes by era. Downtown and Eastside kitchens are about opening a closed pre-1960 plan. Canyon Crest and Orangecrest are about making a later tract layout work harder.
Related Kitchen Services
- Whole-kitchen remodeling. The build the drawings feed into, demolition through final punch.
- High-end kitchen projects. Inset cabinetry, premium slab and integrated panels, where drawing detail matters most.
- Removing the wall between kitchen and living room. Feasibility, beam detail and the sightlines that follow.
- Kitchen bump-outs and additions. For when the drawing proves the footprint will not hold the plan.
- Built-to-order cabinetry. Boxes made to your wall dimensions, not 3-inch increments.
- Island builds and patio kitchen construction, both of which start from a measured plan.
Frequently Asked Questions
How much does kitchen design cost in Riverside, CA?
Packages typically run $500 to $3,500. A concept layout with a field measure and one plan option sits at the low end, a permit-ready set with a 3D walkthrough and line-item budget at the top. The fee is credited to your contract if we build it.
Is the design fee really credited to the build?
Yes. The full amount comes off your contract when we build the project. Build with someone else and you keep the drawings, with the fee standing as payment.
How long does the design phase take?
Three to five weeks from field measure to a locked set. Structural changes and additions run longer, since feasibility and beam coordination come first.
Do I get a 3D rendering, or just floor plans?
Both, in the standard package and above: a scaled plan view, elevations of every cabinet wall, and a rendered walkthrough in the door style, counter and tile you picked.
Can you tell me whether a wall can come out?
We review feasibility and tell you what it takes. A non-bearing partition is straightforward. A bearing wall typically needs an engineered beam detail and plan check, handled in the structural package.
Do the drawings work for permits?
The full and structural packages are prepared to submit. Permits are typically required once electrical, plumbing, gas or structural work is involved, and are pulled through the City of Riverside Community & Economic Development Department or the relevant city or county department elsewhere.
Can I use your design with my own contractor?
You can. The drawings and schedules are yours once the fee is paid, appliance specs and lighting plan included. The credit applies only to work we build.
Book a Kitchen Design Consultation in Riverside
Call (951) 257-7991 or request a consultation online. Bring photos, rough dimensions and a budget range. We will measure the room, draw it, render it, and price it line by line before anyone swings a hammer.
Riverside Kitchen Remodeling Pros, 3610 Central Ave, 6th Floor, Ste 14, Riverside, CA 92506. Licensed. Insured. Local.
Request a FREE Quote!
Or call (951) 257-7991. Calls only, we do not receive messages at this number.
Licensed, insured and bonded. Calls only, we do not receive messages at this number.